[LEAF LOGO]
THE CENTRAL USA ROTAX independent Service Centre


independent Service Centre for ROTAX® AIRCRAFT ENGINES

ATTENTION!

WE HAVE AN A & P TECHNICIAN ON STAFF AND
OFFER FLY-IN SERVICE
CALL FOR AN APPOINTMENT
1-800-532-3462 EXT. 154

• ROTAX Engines, Parts and Repair Services for your ROTAX Powered Aircraft
• Ultralight, Experimental Light Sport & Special Light Sport Aircraft Maintenance
• Sales of Engine and Flight Instruments, Tires, Brakes, Propellers, Hardware & Pilot Supplies

.

SUN-N-FUN 2012
LAKELAND, FLORIDA
March 27th - April 1st
STOP BY THE ROTAX SERVICE CENTRE TENT AND PICK UP A FREE CATALOG!

 

ATTENTION INTERNATIONAL CUSTOMERS CALL 1-262-763-4087,
PLACE YOUR ORDER AND PICK IT UP AT THE SHOW!

EAA 2012 AIRVENTURE
OSHKOSH
JULY 23rd -July29th, HANGAR D, BOOTHS 4041-4042
STOP BY AND PICK UP A FREE CATALOG!
2012 ROTAX Seminar Schedule
ALL SEMINARS HOSTED BY LEADING EDGE AIR FOILS WILL BE HELD AT:
1216 NORTH ROAD, LYONS, WI 53148
Program - Dates Pre-requisites
PROGRAM OVERVIEW

ROTAX 2 Stroke Maintenance Program

TBA

 • 16 hour FAA approved repairman rating
• 120 hour repairman maintenance rating
• Past attendance at a RFSC program with at least a level 1 rating
• Any recognized FAA or CAA repair or
maintenance rating from country of origin
(i.e.: A & P)
 Students must show completion of the familiarization program prior, or equivalent. The FAA 16 hour repairman program can be used as a prerequisite for enrolment. The program will show systems function, full disassembly and reassembly and ratings will be dependent on past training and experience. This program is designed for professional service providers or advanced owner maintenance technicians.  

RFSC 912 SERVICE SPECIALTY PROGRAM

Thursday and FridaySeptember 22, 23

 Basic Entry: No Pre-requisites required. After successful completion of this specialty, students will be able to do all inspections, up to annual or 100 hour. Attendees will be shown all aspects of the 100 hour inspection and work with aircraft equipped with the 912 series Rotax® engine. Hands on experience is a crucial part of this program and students will learn the correct procedures for oil change, spark plug change, gearbox inspection, carburetion inspection and balance, compression testing, and other critical inspection items. In addition system operations will be explained such as the dual ignition system, the gear reduction system, the dry sump oiling system, and basic trouble shooting of these systems. The program is a 16 hour, 2 day, and complies with all requirements from Rotax® Aircraft Engines intended learning outcomes for this level.

RFSC 912 LINE MAINTENANCE SPECIALTYPROGRAM

Saturday and Sunday September 24, 25

 Minimum Service Program rating from prior training or 120 hour repairman maintenance rating and proof of work already done with ROTAX
(past experience).		 Following successful completion of a Service specialty, a technician can take the Maintenance Specialty Program to learn how to change line replaceable parts, without removing the engine from the aircraft. Line items that can be removed and replaced, such as the gearbox, the oil system, the cylinder heads, cylinders, pistons, and the ignition modules and coils, are all covered. Technicians will be shown and assist in the removal and replacement using the correct tooling and procedures as required by Rotax® Aircraft Engines Expanded trouble shooting is also a part of this 16 hour, 2 day program.

ROTAX Renewals

Monday September 26

 Members must show that they have been actively working at their specialty rating for two years. This 1 day program is available to current and active RFSC members only. It allows members to renew their speciality levels in an cost effective manner.

RFSC 9 SERIES HEAVY LINE MAINTENANCE SPECIALTY

Tuesday thru Thursday September 27-29

 The technician must have 2 years field experience in Rotax engines and must hold a current RFSC 912 Service Specialty and RFSC 912 Maintenance Specialty rating. As per the manuals, the technician must have access to the proper tool and facilities.

This program is not available to everyone. It is intended for those working on the Rotax Powered Aircraft. This program covers the repair to all Rotax 9 series engines. Everything in the Rotax 9 Series Heavy Maintenance Manual is covered/ This is a 24 hour (3 day) program.